User`s guide

Starting the Instrument

Once you have properly connected all the instruments in your inspection setup,

you can start the Ectane.

To start the Ectane:

1. Connect the power adapter to the power cord.

2. Connect the power adapter to the power socket on the front of the Ectane.

3. Connect the power cord to the wall outlet.

4. Press the ON/OFF button until it clicks.

An orange LED lights up on the O

N/OFF button, and all indicators on the front

of the instrument light up as well.

Note If you want to work from the batteries, simply press the ON/OFF button.

Understanding Indicators

There are various indicators on the front of the Ectane. The following pages

explain the various behaviors of these indicators.

Power Indicators

Two indicators are assigned to the instrument power status:

 Power switch indicator

Circular

LED integrated in the ON/OFF switch. Should light orange when the

Ectane is powered on.

 External power indicator

Should light green when the external

AC adapter is connected and powered.