User`s guide

Charging the Batteries

Figure 1 Battery charger

To charge the batteries using the optional external charger:

1. Place the charger on a flat and level surface, away from sources of heat and

moisture.

2. Plug the DC connector from the power supply into the back of the charger.

3. Connect the power supply to the mains AC supply using the supplied cable. All

LEDs will flash momentarily to let you know that power is present.

4. Place the battery into either of the battery bays, ensuring that the 5-way

connector is fully seated.

The LEDs in the status window will provide status information, and the

charger will automatically begin charging.

Battery Charger LED Status Indicator

When batteries are inserted in the charger, status LEDs light up in the status

window:

Green (flashing) Battery is charging

Green (solid) Battery is fully charged

Blue (flashing) Battery in calibration mode

Blue (solid) Battery fuel gauge calibrated

Red (flashing) Battery gauge in need of calibration

Red (solid) Error

Battery bays

Calibration

buttons

Status

window