User`s guide

34
Chapter 4: Connector References IRIS Connector
IRIS Connector
The IRIS connector allows the instrument to control IRIS probes.
Figure 5 IRIS Connector
EDDY CURRENT ARRAY Connectors
On Ectane™ units with the SmartMUX™ option, 160-pin connectors are available
on the front of the instrument, under E
DDY CURRENT ARRAY. These connectors are
specific and designed by Eddyfi.
For more information on the Eddyfi 160-pin connectors, please contact Eddyfi
directly at [e-mail].
Description BNC Adapter, bulkhead, 50
Ω
Manufacturer, number Amphenol 31-220N-RFX
Eddyfi NDT, Inc., MACN4022
Suggested cable connector POMONA, 2249-C-120
Eddyfi NDT, Inc., MAME0021
Table 5 IRIS connector pinout
Pin Signal Description
Center Pulser output
Receiver input
Ultrasound pulser outputs and ultrasound receiver input
Shell Ground Power supply common to the instrument and casing