User`s guide

38
Chapter 5: Specifications General
General
This section presents the Ectane™ system general specifications.
System
Power Requirements
Warm-up time
a
a. The warm-up time corresponds to the time required by the unit to reach its optimal accuracy after power-up. Eddyfi recommends
to wait until the end of the warm-up tim before balancing probes and performing acquisitions.
15 minutes
Workstation link Ethernet 100BaseT
Transfer rate on Ethernet cable 100 Mbps
Power configuration 100 W external AC/DC power supply of
15 VDC, or battery (removable)
Voltage 100 – 240 VAC, ±10 %
Frequency 50 / 60 Hz
Maximum input current 1.5 A
Battery type Lithium-ion, rechargeable, DOT-
compliant
Battery life
a
a. Typical (with two batteries in the instrument)
8 hours