Air-Horn Gaskets for Performer Series Carburetors Instructions Manual

®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230
®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230