Owners manual

Part #1534, 1535

Brochure #63-1534

Rev. 6/2/15 - QT

Edelbrock E-Force Supercharger System

2011-’13 Dodge/Chrysler 5.7L and 6.4L Hemi

Installation Instructions

Page 20

89. Remove the power steering oil cooler from the retaining

clips. Using a panel removal tool or equivalent, carefully

remove the retaining discs behind the A/C condenser.

NOTE: If necessary, new factory retaining clips can be

purchased at your local dealership (PN - 05183297AB).

90. Extend the passenger side power steering oil cooler

hose using the supplied 3/8” coupler, oil hose extension,

and 3/8” hose clamps. NOTE: Some oil spillage may occur,

make sure to clean any spillage before proceeding.

91. Reattach the retaining clips to the oil cooler. Reinstall

the oil cooler assembly to the first row of the A/C Condenser

as shown below. Secure the oil cooler assembly to the A/C

condenser with the retaining discs.

NOTE: Dodge Chargers and Chrysler 300s will use the

longer black horn brackets. Dodge Challengers will use the

shorter zinc horn brackets.

92. Reinstall horns using the factory hardware and supplied

mounting brackets.

Chargers/300s

Challengers

93. Reinstall the radiator assembly using the factory bolts.

Reinstall the upper and lower radiator hoses.

94. Using side cutters or equivalent, cut off the condenser

support cables.