Owners manual

Edelbrock E-Force Supercharger System
2011-’13 Dodge/Chrysler 5.7L and 6.4L Hemi
Installation Instructions
PLEASE COMPLETE THIS PROCEDURE PRIOR to starting the installation of your E-Force supercharger system. This
will allow our calibration team to complete your calibration file while the installation of your supercharger system
is being completed. Manufacturers regularly update the factory calibration, as a result, there is the possibility for
delays due to not having access to your current calibration file. This can normally be resolved in 1 business day.
FAILURE TO PROVIDE ALL OF THE INFORMATION BELOW WILL DELAY THE COMPLETION OF THE CALIBRATION FILE FOR
YOUR VEHICLE. TO LIMIT VEHICLE DOWN TIME, PLEASE SEND US THE REQUESTED INFORMATION BEFORE STARTING
THE SUPERCHARGER INSTALL.
Please e-mail the requested information below to [e-mail] with the E-mail Subject as “Calibration Update”. We
will complete your calibration and e-mail it back to you as soon as possible. MOST calibration updates will be sent back the same
business day. In rare cases, it could take up to 1-2 business days to complete. Please contact our Tech Hot Line at [phone] if
you have any questions or if you need assistance with this procedure.
INFORMATION NEEDED:
E-Mail Address:
Vehicle Year:
Vehicle Make:
Vehicle Model (Specify if Z06, Z51, SRT8, RT, Boss 302, etc..):
Engine Size:
Transmission:
Fuel Octane (91 or 93 ONLY):
Supercharger System Part Number:
Supercharger Serial Number:
Programmer Serial Number:
ECU OS Part Number:
ECU OS Part Type:
INSTRUCTIONS FOR GETTING THE ECU OS PART NUMBER & TYPE:
With the ignition OFF, connect the supplied SCT X4 Programmer
to the OBDII port of the vehicle using the cable included with the
SCT programmer.
Once the SCT programmer powers on, it will take you to the Main
Menu. Press the down arrow to highlight the “Vehicle Info” option
and press the round center button to accept.
Follow the on-screen instructions. When prompted to do so, turn
the vehicle’s ignition ON but do not start the engine. Press the
round center button to accept. The ECU OS Part Number and
Type will be displayed on the following screen.