Owner`s manual

ManualsBrandsEdelbrock ManualsAutomobile Accessories262-400

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.

Intake Manifolds

Whether you’re building a daily driver, ultra high-performance street machine or

race car, an Edelbrock intake manifold will provide the power right where you want

it. Edelbrock has several styles of aluminum intake manifolds to fit different appli-

cations. Each style of manifold has characteristics that make it ideal for the applica-

tion for which it is intended. Years of design and testing in the area of induction

technology have given the Edelbrock team invaluable insights into which character-

istics work best under what conditions.

RPM AIR-GAP® (1500 to 6500 RPM)

RPM Air-Gap® intake manifolds feature the same race winning technology that’s been used in

the proven Victor Series manifolds for years. This design incorporates an open air-gap that sep-

arates the runners from the hot engine oil, creating a cooler, denser air-charge for more power.

RPM Air-Gap manifolds are modeled after the Performer RPM series runner design for street

high-performance from 1500 to 6500 rpm.

PERFORMER AIR-GAP®

Designed for 1955-86 262-400 c.i.d. Small-Block Chevy’s, the Performer Air-Gap features the air-gap

design for the ultimate street performance in the idle to 5500 rpm range. This design features an open

air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for

more power. High-velocity runners deliver excellent throttle response throughout the power band. The

great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an

ideal choice for street rods and street machines. No provision for exhaust heated chokes or exhaust

crossover. For spread-bore or square-bore carburetors without adapter. Will not fit under stock

Corvette hood.

Part No. 2601 Non-EGR, Satin Finish

Part No. 26011 Non-EGR, Polished Finish

Part No. 26014 Non-EGR, EnduraShine Finish

Part No. 2604 Non-EGR for '87-'95 Cast Iron Heads w/Canted Center Bolt Holes, Satin Finish

#2601

RPM AIR-GAP® for LT1 and LT4 V8

These Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-

ram style that provides that next level of performance you have been looking for. They are both direct

stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer

RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish.

Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power out-

put. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will

accept OEM fuel rails.

Part No. 7107 LT1 Engines

Part No. 7109 LT4 Engines

#7109

#7501

#75614

#7518

APPLICATION SATIN ENDURASHINE GASKET SET

AMC

304-401, non-EGR 7531 ---- 7213

CHEVY

262-400, non-EGR 7501 75014 7201

262-400 Vortec, non-EGR 7516 75164 7235

LS1 Dual Quad, non-EGR 7518 75184 ----

396-502 oval port, non-EGR 7561 75614 7203

396-502 rect port, non-EGR 7562 75624 7202

CHRYSLER

340-360, non-EGR 7576 ---- 7276

318-360, Magnum non-EGR 7577 ---- 7277

FORD

260-302, non-EGR 7521 75214 7220

351W, non-EGR 7581 75814 7220

351C 4-V, non-EGR 7564 ---- ----

429-460, non-EGR 7566 ---- 7223

Pg001_032 3/13/09 9:51 AM Page 16