Owner`s manual

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.
22
Professional Products produces their extensive line of beautifully crafted Throttle
Bodies from permanent mold castings that result in reduced porosity and produce a
better finish than sand castings. In addition all butterflies are hand fitted for
accuracy in the main bore, a critical fit and performance area. Available in OE
appearing satin or show polished finishes.
POWER
TM
Throttle Bodies
for FORD Mustang V8s
Choosing your Throttle Body size:
65mm- Ideal size for stock manifolds
70mm- Ideal size for Professional Products manifold
75mm- high horsepower engines, should be matched to intake port
Application Polished Satin
65mm Throttle Body 86-93 Mustang 5.0L 69200 69203
70mm Throttle Body 86-93 Mustang 5.0L 69201 69204
75mm Throttle Body 86-93 Mustang 5.0L 69202 69205
65mm Throttle Body 94-95 Mustang 5.0L 69210 69213
70mm Throttle Body 94-95 Mustang 5.0L 69211 69214
75mm Throttle Body 94-95 Mustang 5.0L 69212 69215
70mm Throttle Body 96-04 Mustang 4.6L 69220 69222
75mm Throttle Body 96-04 Mustang 4.6L 69221 69223
64mm Throttle Body 05-later Ford 4.6L 3V 69226 69227
EGR Spacers
EGR spacer plates are required on 86-93 applications if you wish to run your
EGR valve connections.
Application Polished Satin
65mm EGR Spacer for 86-93 Mustang 5.0L 69500 69503
70mm EGR Spacer for 86-93 Mustang 5.0L 69501 69504
75mm EGR Spacer for 86-93 Mustang 5.0L 69502 69505
Electronic Fuel Pump
Professional Products offers two new
electronic fuel pumps for applications
where the stock pump fails and is difficult
or cost prohibitive to replace. These
pumps are for carbureted vehicles and come
in two versions based on pressure output.
Throttle Bodies & Fuel Pumps
POWER
TM
Throttle Bodies
for LT1/LS1/LS2
Application Polished Satin
52mm Throttle Body 92-97 LT1 69700 69701
58mm Throttle Body 92-97 LT1 69702 69703
52mm Throttle Body 85-92 305/350 69704 69705
58mm Throttle Body 85-92 305/350 69706 69707
80mm Throttle Body 98-02 LS1 Camaro/Firebird,
04 GTO & 99-02 full size 4.8/5.3/6.0L with
cable style throttle linkage 69724 69725
85mm Throttle Body 98-02 LS1 Camaro/Firebird,
04 GTO & 99-02 full size 4.8/5.3/6.0L with
cable style throttle linkage 69726 69727
96mm Throttle Body for LS2 egines
w/cable throttle linkage 69728 69729
The reciprocating piston uses only 25 lbs. of
pushrod force. Operates at a constant 4 to 50
PSI with most aftermarket pressure regulators,
60 lbs unregulated. Absolutely no drop in fuel
pressure throughout entire RPM range.
Compatible with gasoline or methanol. Kits
include a Professional Products #10651 Fuel
Pressure Regulator. This regulator is adjustable
from 4.5 to 9 PSI and is suitable for applications
up to 650 hp. The regulator flows 150 GPH. It
has a 1/2-NPT inlet and two 3/8-NPT outlets.
69213
69203
69200
Description Part No.
Fuel Pump Only - Polished Finish 10730
Fuel Pump Only - Satin Finish 10731
Fuel Pump with Regulator - Polished Finish 10732
Fuel Pump with Regulator - Satin Finish 10733
Description Part No.
4 to 7 psi for Most Domestic Carburated Vehicles 10700
2.5 to 4 psi for Most Imported Carburated Vehicles 10701
Piston Style Fuel Pump for SB Chevy
Application PART NO.
180 liter/hr, 45 PSI, Red (up to 460 HP) 70150
220 liter/hr, 45 PSI, Blue (up to 600 HP) 70151
255 liter/hr, 45 PSI, Black (up to 700 HP) 70152
These pumps are available suitable for engines
up to 700+ hp. They are very similar in design to
popular Walbro or Airtex pumps but feature
1/4-NPT inlet and outlet ports which allow the
use of a wide variety of standard fuel line fit-
tings. The extruded aluminum mounting brack-
et/heat sink is supplied with the pump.
*Reduce horsepower numbers by 5% for super-
charged or turbocharged applications and by
30% for E85.
EFI Inline External
Fuel Pumps
Fully adjustable and allows positioning a full
360° in increments of 15°, giving great flexi-
bility in positioning the inlet to clear other
under hood components and permit the
best routing of the air inlet hose. The base
flange bolts to any square bore 4150 carb
flange. The main body has a 6-bolt inlet
flange and a GM LS2 throttle body will bolt
directly to this flange.
EFI SNORKEL INLET
Description Part No.
Snorkel Assembly - Polished 70212
Snorkel Assembly - Satin 70213
LS1 Adapter - Polished 70214
LS1 Adapter - Satin 70215
NEW!
NEW!
Pg001_032 3/13/09 9:59 AM Page 22