Owner`s manual

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.
29
Fuel System Components
Mallory has been an industry leader in race-winning performance products during the
past 75 years, Mallory products have contributed to winning more races than all other
brands combined. While Mallory is best known for ignition, their fuel system product
line includes; electric fuel pumps, in-tank style electric pumps, fuel pressure regulators,
high flow/high efficiency filters and accessories. Mallory products are engineered to
deliver the kind of serious power, quality and performance that separates the novices
from the champions.
HIGH EFFICIENCY
140 SERIES FUEL FILTER
The 140 Series Comp Fuel Filter is designed for
the high performance enthusiast who knows the
importance of always ensuring that there is a
fuel filter between the fuel tank and the electric
fuel pump. Perfect for engines which require a
maximum flow, minimum restriction filter.
Part No. 3140
3-PORT COMPETITION
FUEL PRESSURE REGULATOR
RETURN STYLE
The 3-Port Return Style Fuel Pressure Regulators
are designed to regulate fuel pressure between
high pressure fuel pumps and carburetors. This
style of regulator features a fully machined hous-
ing form 6061-T6 aluminum billet with three out-
let ports and specially designed high flow fuel
passages.
Part No. 4309 Competition Street/Racing
HIGH PERFORMANCE FUEL FILTER
for FUEL INJECTION APPLICATIONS
Dual 3/8" NPT inlets and outlets up to 125 gph.
Part No. 3160
MODEL 70
HIGH PERFORMANCE
ELECTRIC FUEL PUMP
High pressure 12-volt fuel pump delivers 70+
GPH free flow @ 12.5 volts. Internal bypass regu-
lator factory set at 6 PSI. Delivers 30+ GPH at 5
PSI. 3/8" NPT thread size, 5/16" or larger fuel
line recommended. Use regulator part number
4207, 4210, 4307M, 4316M or 4309 for best per-
formance.
Part No. 4070M
MODEL 60FI HIGH PERFORMANCE
ELECTRIC FUEL PUMP
Gerotor design reduces noise versus louder vane
and turbine pumps. Tough Gerotor pump design
eliminates vane brakage problems. High pressure,
12-volt fuel pump delivers 60+ GPH free flow @
12.5 volts. Delivers 40 GPH at 40 PSI. 3/8" NPT
thread size, 5/16" or larger fuel/return.
Part No. 4060FI
MODEL 110 COMP
ELECTRIC FUEL PUMP
Precision CNC-machined pump housings
insure long life versus cast housings. Tough
Gerotor design reduces noise versus louder
vane and turbine pumps and eliminates vane
breakage problems. All aluminum components
anodized for corrosion and wear resistance.
High efficiency electric motors deliver more
output using less amps than competitors.
Internal bypass regulator factory set at 7 PSI.
Delivers 90+ GPH at 6 PSI. 3/8" NPT thread
size, 3/8" or larger fuel line recommended. Use
regulator part number 4207, 4210, 4307M,
4316M or 4309 for best performance.
Part No. 4110
4-PORT FUEL PRESSURE REGULATOR
Unique diaphragm material resists all fuel additives, even alcohol and
methanol. Broadest possible pressure range. Easy to install and adjust for
maximum performance. Design-matched for use with 110 and 140 Series
Mallory Comp Pumps.
Part No. 4307M
UNIVERSAL FUEL PRESSURE REGULATOR
CNC-machined billet aluminum construction.
Special quick action diaphragm design. A must
for high-pressure fuel pumps for maximum per-
formance. Flow-matched inlet and outlets for
perfect pump matching. Allows you to fine tune
your fuel injection. Built-in fuel pressure port.
Built-in pressure compensating for super-
charged/turbocharged engines. Fully servicea-
ble - not a "throw-away design" like most com-
petitors. Available for use with gasoline or alco-
hol/methanol. Complete with mounting bracket
and hardware. For high pressure fuel injection
applications. Design-matched for use with 60FI
and 110FI Mallory Comp Pumps, Mallory High
Output In-Tank and In-Line Pumps.
Part No. 4305M
4307M
MODEL 140 COMP ELECTRIC
FUEL PUMP w/Regulator
Precision CNC-machined pump
housings insure long life versus cast
housings. Tough Gerotor design
reduces noise versus louder vane
and turbine pumps and eliminates
vane breakage problems. All alu-
minum components anodized for
corrosion and wear resistance. High
efficiency electric motors deliver
more output using less amps than
competitors. Includes complete
hardware package for easy mount-
ing. Delivers 120+ GPH at 6 PSI.
Internal bypass regulator factory set
at 12 PSI. 3/8" NPT thread size,
3/8" or larger fuel line recommend-
ed. Includes regulator p/n 4207.
Part No. 4140
2-PORT STREET/COMPETITION
FUEL PRESSURE REGULATOR
NON-BYPASS (DEADHEAD) STYLE
CNC-machined billet aluminum construction.
Special quick action diaphragm design. A must
for high-pressure fuel pumps to prevent carbu-
retor flooding. Flow-matched inlet and outlets
for perfect pump matching. Built-in fuel pres-
sure port. Compact design fits where others
cannot. Design-matched for use with 70, 110,
and 140 Series.
Part No. 4207 Street/Competition
Pg001_032 3/13/09 10:00 AM Page 29