Owner`s manual

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.
32
CHROME FUEL PUMP
BLOCK-OFF PLATES
Chrome plated steel block-
off plates cover stock fuel
pump openings. Block-off
plates are complete with
gasket.
Dress up the fuel pump
area on 265-400 Chevy
SB. Ideal for mounting
stock OEM type pump.
Complete with gasket.
Part No. 1514
DESCRIPTION PART NO.
Small Block Chevrolet 1515
Big Block Chevrolet & most V8’s & V6’ s 1516
POWER VALVE
BLOCK OFF
Fits Holley carbs, includes
Teflon washer
Part No. 1510
CHROME FUEL PUMP
MOUNTING PLATE
FUEL PRESSURE
GAUGE WITH
IN-LINE
ADAPTER
Ideal for in-line hook-up of
fuel pressure almost any-
where. This gold anodized aluminum fuel block
has 3/8" inlet and outlet. It comes complete with
a 1-1/2" diameter gauge with 1/2 lb. increments
and a range of 0-15 lbs.
Part No. 1560 Gauge w/adapter
Part No. 1561 Gauge only
Part No. 2975 Adapter only
VACUUM CAP
ASSORTMENT
Vacuum caps block off
open engine vacuum
fittings.Quality
“Buna-N” rubber makes
for a much more
durable, long-lasting part as
compared to neoprene or vinyl materials, espe-
cially when exposed to high under-hood temps.
Includes 4 of 1/8”, 4 of 3/16”, 4 of 1/4”, 2 of
5/16", and 2 of 3/8" in each assortment.
Part No. 3704
CLEAR-VIEW FUEL BOWL
SIGHT PLUGS
for Holley Carbs
Allows you to check the fuel level in the float
bowls without removing the plugs. Faster, easier
and less hazardous to set float levels.
Part No. 6057
MOUNTING CLAMPS
Insulating with Adel 75005 com-
pound means easier mounting of
wire, fuel hose, etc., to any solid
surface. Aircraft quality materials
used. 6/set.
DESC. PART NO.
3/16" I.D. 3770G
3/8" I.D. 3772G
DESC. PART NO.
1/2" I.D. 3773G
9/16" I.D. 3774
DESCRIPTION PART NO.
Dual-inlet Holley
3-bbl. (3/8" tube, 8-21/32" centers) 1551
4-bbl. (3/8" tube, 9-5/16" centers) 1552
4-bbl. fits 4010 Ser. (3/8" tube, 8-3/16" centers)1553
4-bbl. fits 4011 Series 1554
Fits Race, Speed, Road Demon Carburetors 1575
CHROME GAS
LINE KIT
Add a “touch of class” to your engine with these
bright chrome-plated gas line kits. Constructed
with copper tubing, brass fittings and silver
brazed connections. The “hex” design provides
wrenching area for easier installation of fittings.
QUICK
DISCONNECT
THROTTLE
LINKAGE
BALL JOINT
2 per set.
Part No. 3811G
FUEL
REGULATOR
Adjusts from 1 to 6 lbs.
Fits 5/16" & 3/8" I.D. fuel
line. Includes fittings.
NOT FOR FUEL INJECT-
ED SYSTEMS.
Part No. 9710
CHOKE CONTROL
CABLE KIT
Cable assembly is
composed of sturdy
solid steel inner wire with
a plated steel outer spring
shroud. Cable is 72” long and
can be shortened with simple
hand tools. Easy installation.
Requires a 3/8" mounting hole.
Part No. 2078
CHROME FUEL LINE
with FUEL
PRESSURE GAUGE
These fuel lines are not only great looking but are
very functional. They incorporate a small, con-
vient 1-1/2" diameter fuel pressure gauge. The
gauge is designed to read in 1/2" lb increments
and has a range of 0-15lbs. Inverted flare female
inlet thread size 5/8-18.
DESCRIPTION PART NO.
Fits Holley w/8-21/32" centers 1558
Fits Holley w/9-5/8" centers 1559
Fits Race, Speed, Road Demon Carburetors 1576
APPLICATION PART NO.
2-3.5 PSI, 42 GPH,
Most import carburetor applications 42S
4-7 PSI, 35 GPH, Most 4, 6 & 8 cyl.
domestic carburetor applications 12S
MICRO ELECTRIC
FUEL PUMPS
Eliminate mechanical fuel
pumps with these universal
pumps for carbureted appli-
cations. Simple two wire
design & universal mount for
ease of installation.
Carburetor Accessories
The Mr. Gasket brand provides a variety of performance and racing products
for all parts of your vehicle including: carburetor and fuel accessories,
chrome-plated accessories, cooling system accessories, engine components,
ignition and electrical accessories, shifter accessories, specialty tools and
suspension and driveline components.
CARBURETOR
BUSHING/PIVOT
Carburetor bushing replaces a
worn out or sloppy factory bushing
and gives smooth, trouble-free
throttle operation. Accommodates
1/4” diameter throttle rod.
Part No. 1512 GM and most
Holley carbs with 1/2" diameter
throttle hole
CHROME
THROTTLE
SPRING BRACKET
Bracket mounts to carb stud or intake
manifold. Slotted design fits most vehicles.
Part No. 3683
THROTTLE RETURN
SPRING KIT
Fits Holley 2300/2305
series 2 bbl. &
4150/4160 series
4 bbl. Includes heavy
and light springs.
Bracket is chrome plated steel. This kit also has
many universal applications.
Part No. 9678
DUAL THROTTLE
RETURN SPRING KIT
Universal in design and engineered for positive
throttle return to assure added safety. Springs
are Electro-Nickel plated with chrome plated
bracket.
Part No. 19
Pg001_032 3/13/09 10:00 AM Page 32