Owner`s manual

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.
33
Carburetor Accessories
The Mr. Gasket brand provides a variety of performance and racing products
for all parts of your vehicle including: carburetor and fuel accessories,
chrome-plated accessories, cooling system accessories, engine components,
ignition and electrical accessories, shifter accessories, specialty tools and
suspension and driveline components.
DESCRIPTION PART NO.
Adapt any 4-bbl. carburetor to any 4-bbl. manifold (except Holley
4500 and OEM manifolds with exposed exhaust crossover tubes)
Adapter only, 3/4” nominal height. 1932
Adapts any 4-bolt, 4-bbl. to any small 4-bolt, 2-bbl. manifold and/or
any 4-bolt, 2-bbl. to any 4-bolt, 4-bbl. manifold (except spread bore)
Adapter only, 1” nominal height. 1933
Adapts Holley 350/500 2-bbl. carburetor to quadrajet bolt pattern.
Adapter only, 1-1/8” nominal height. 1929
PHENOLIC THERMAL
INSULATING CARB SPACERS
Designed to insulate and reduce heat flow to the
carb keeping it cooler to allow a denser fuel mixture
to enter the engine and produce more horsepower.
Includes gaskets, studs, nuts and washers.
ALUMINUM CARB SPACER KITS
Increase your power and performance with a 1” or 2” carburetor spacer.
Designed to fit the standard Holley/Carter bolt
pattern. Precision die cast aluminum spacer kits
are complete with studs, washers, nuts, and gas-
kets. The one inch open center spacer #6005
features a 1/4” diameter knock out hole if an
additional vacuum port is required.
DESCRIPTION PART NO.
1" Four-hole bore 3404
1" Open center 3405
DESCRIPTION PART NO.
Universal Fits 3/8", 5/16" and 1/4" ID 9706
Fits 5/16" ID hose 9747
Fits 3/8" ID hose 9748
Replacement element, 3 per package 896G
CLEARVIEW FUEL FILTERS
Visually check the condition of your fuel with a
Clearview fuel filter. Features chrome plated ends
that are barbed for positive fuel retention.
CHROME PLATED CANISTER FUEL FILTERS
This chrome plated fuel filter is a welcome addition to any
custom and performance engine. Polished and chrome
plated to a high luster to complement other under hood
chrome accessories. The inlet/outlet openings have a safe-
ty bead for positive fuel line retention. Filter is visually
packed complete with two chrome clamps.
DESCRIPTION PART NO.
1" Open center 6005
1” Ported 6006
2” Open center 6007
CARB HEAT SHIELD
Helps eliminate fuel boiling and vapor lock caused
by heat conducted from the manifold to the carb.
CARBURETOR
ADAPTER KITS
Increase your car’s overall per-
formance by updating the carbu-
retion to the latest hi-perform-
ance carburetors without purchas-
ing costly intake manifolds. Gaskets,
studs, nuts and washers are included.
Made of die-cast aluminum.
CHROME PLATED CARB LINKAGE PLATE
Takes the hassle out of throttle linkage hookups.
Part No. 6035 For Holley & AFB
DESCRIPTION PART NO.
Fits 5/16" ID hose 9745
Fits 3/8" ID hose 9746
CHROME THROTTLE CABLE BRACKETS
One bracket is made for throttle cable only, the
other has a secondary attachment for vehicles
with automatic transmission kickdown cables.
DESCRIPTION PART NO.
Throttle bracket only 6038
Throttle bracket w/kickdown 6039
APPLICATION PART NO.
Holley
4 bbl. Open center 54
4 bbl. 4-Hole 55
4500 4-Hole 58B
4500 Open center 58C
4 bbl. Spread bore 58E
2 bbl. 350/500 CFM 49
Holley/Demon Square flange
4 bbl., 4-Hole Open center 48C
APPLICATION PART NO.
Carter
4 bbl. AFB open center 54
4 bbl. 4-Hole, 1 11/16" bore 55
4 bbl. 4-Hole, 1 7/16" bore 57
4 bbl. Thermo quad 4-hole 57A
4 bbl. Thermo quad open center 57B
Rochester
4 bbl. Quadrajet 4-hole 56
4 bbl. Quadrajet open center 56A
2 bbl. Small Base 51
2 bbl. Large Base 52
CARB BASE GASKETS
Made from Accopac, carburetor base gaskets are
precision cut for excellent seal and fit. Gaskets are
reusable.
APPLICATION PART NO.
1/4” Holley and AFB 97
1/2" Holley and AFB 98
CARBURETOR HEAT DISSIPATORS
A lamination, made of special heat-absorbing, gasket material separated by
layers of aluminum alloy, forces engine heat into the air stream away from the
carburetor. The heat dissipator allows a cooler,
denser fuel mixture and helps to prevent
engine heat from vapor-locking gasoline in
the carburetor. This unit also acts as the car-
buretor mounting gasket.
These are only the most popular applications.
Ask us if you don’t see yours.
DESCRIPTION PART NO.
Fits all Holley (exc. 4500) & Carter AFB, 1/2" 3710
Fits all Rochester Q-Jet 1/2" 3712
DESCRIPTION PART NO.
Holley/Demon square flange 4-bbl. carbs, fits open center manifold 4277G
Holley/Demon square flange 4-bbl. carbs, fits 4-hole manifold 4278G
Holley Dominator/King Demon carbs, fits open center manifold 4279G
Holley Dominator/King Demon carbs, fits 4-hole manifold 7280G
CARBURETOR BASE VIBRATION
ISOLATOR GASKETS
Made of 1/4" thick closed cell foam rubber mate-
rial designed to act as a shock absorber to damp-
en fuel vibration, reduce fuel foaming & cut down
erratic needle/seat motion
Pg033_064 3/13/09 10:44 AM Page 33