Owner`s manual

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.
37
Genuine Edelbrock Service Parts
Maintain and tune your Edelbrock fuel system components with
authentic Edelbrock service parts. Each component has been
calibrated and tested to deliver the performance you expect from
Edelbrock. Edelbrock-The Most Respected Name in Performance.
SECONDARY
METERING RODS
Dimension indicates tip diameter.
Letters are for identification purposes only. All Years.
Part No. 1952
CK, .0527"
QUADRAJET ADAPTER &
FUEL LINE KIT
All necessary hardware to add an
Edelbrock square-bore carb to a stock
Q-Jet or Thermo-Quad manifold.
Part No. 2697
FORD
THROTTLE
LEVER
ADAPTER
(1968 and later)
Adapts Edelbrock
Performer Series
carbs to Ford vehi-
cles equipped
with automatic trans.
(except AOD).
Part No. 1483
CHRYSLER
THROTTLE
LEVER
ADAPTER
(1966 and later)
Adapts Edelbrock
Performer Series carbs to Chryslers
and accepts cruise control.
Part No. 1481
STEP-UP SPRING
ASSORTMENT
Includes 3"Hg (blue), 4"Hg (yellow),
5"Hg (orange), 7"Hg (pink) and
8"Hg (plain) springs. (each in pairs)
Part No. 1464
OFF-ROAD
NEEDLES & SEATS
Includes a pair of spring loaded
needles and .0935” seats.
Part No. 1465
EGR
ADAPTER
Allows EGR valve clear-
ance for 1400 carb on
3701/3706 manifolds.
Part No. 1476
GASKET KIT
Contains all gaskets for all
Edelbrock Performer Series carbs
including airhorn and carb to
manifold gasket.
Part No. 1472
CARBURETOR INLET
FITTING
5/ 8"-20 Banjo to 3/ 8" Hose Barb
Part No. 8089
CARBURETOR
REBUILD KIT
Includes all parts and gaskets nec-
essary to rebuild all Edelbrock
Performer Series carbs.
Part No. 1477
ELECTRIC CHOKE KIT
Includes all parts necessary to convert
1404, 1405, 1407 and 1411 Edelbrock
Performer Series carbs to electric choke.
Part No. 1478
FLOAT KIT
Includes 2 floats,
2 pins and a float
setting gauge.
For all EPS carbs.
Part No. 1469
DESCRIPTION PART NO.
Mounts Edelbrock square-bore carb to stock Quadrajet
and Thermo-Quad manifolds (.850" thick) 2696
Mounts square-bore Holley carb to spread-bore
Edelbrock intakes, except #2101/3701 (1/16" thick) 2732
GASGACINCH
GASKET
SEALER
Assures proper
sealing of all gas-
kets used in a manifold installation.
Can be used on water pump, oil
pan and valve cover gaskets.
Water and oil resistant, allows for
easy gasket removal during disas-
sembly.
Part No. 9300
4.0 oz.
CARBURETOR
ADAPTERS
& ADAPTER PLATES
CALIBRATION KITS
Kit includes 1 pair of metering rod
retaining springs and an assort-
ment of metering rods, metering
jets and step-up springs in pairs.
APPLICATION PART NO.
For 1403, 1404 carb 1486
For 1405 carb 1479
For 1406 carb 1487
For 1407, 1411, 1413 carb 1480
For 1411 carb 1489
PRIMARY METERING JETS
All years.
.074"
Part No. 1974
CHROME STEEL
FUEL LINE
EPS Carburetor,
Banjo-Style, 3/8" Hose
Barb Inlet
Part No. 8126
HEAT
INSULATOR
GASKET
Nitrile rubber
composite, for
4-Barrel,
Square Bore, 2-Hole
Part No. 9266
Pg033_064 3/13/09 10:45 AM Page 37