Owner`s manual

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.
9
Carburetors & Accessories
More horsepower per cfm than other out-of-the-box carbs, Proform
accomplishes this with their carburetor and replacement main body.
Design features include improved airflow thru elimination of the choke
tower, choke control, and air horn, and the addition of adjustable screw-
in air bleeds and high performance down-leg boosters. Proform - custom
shop features you can afford.
DESCRIPTION PART NO.
650 CFM Mechanical Secondary 67199
750 CFM Mechanical Secondary 67200
850 CFM Mechanical Secondary 67201
950 CFM Mechanical Secondary 67202
650 CFM Vacuum Secondary 67204
750 CFM Vacuum Secondary 67205
1050 CFM Carburetor Mechanical Secondary 67209
• High-performance
Race-Series, hand
assembled in the U.S.
• Utilizes the PROFORM lightweight
aluminum high-flow main body.
• Adjustable, screw-in air bleeds and
high-performance down-leg boosters.
• Maximum air flow: no air horn, choke tower, or choke control.
• Centered on PROFORM billet throttle base plate.
• Adjustable secondary air flow cam bracket and welded throttle shaft.
• Button torx head throttle plate screws.
• Power valve blow out protection and slip link mechanical secondary linkage.
• Assembled with PROFORM billet
metering blocks.
• Changeable idle feed restriction.
RACE SERIES™
CARBURETORS
BILLET METERING BLOCK
Further enhance the performance of your
PROFORM high-flow main body with billet
metering blocks. Machined from solid
aluminum, virtually eliminates porosity prob-
lems, and will not warp. Features a change-
able idle feed restriction with additional
upgrades available for racing applications.
Part No. 67150C
CARBURETOR MAIN BODIES
Add up to 25-50 HP with PROFORM’s 100%
NEW, high-performance carburetor main body
(no re-built components). Has adjustable
screw-in air bleeds, high-performance down-
leg boosters. Get maximum air flow with no air
horn, choke tower, or choke control. Comes
with instructions, all necessary non-stick replace-
ment gaskets and high-performance jet kit.
DESCRIPTION PART NO.
Component for use on Holley® 650 CFM, 700 CFM, 750 CFM &
800 CFM with Mechanical Secondary 67100C
Component for use on Holley® 750 CFM Vacuum Secondary Carbs 67101C
Component for use on Holley® 850 CFM Mechanical
Secondary Carburetors 67107C
TRACKSIDE CARB SPACER KITS
Easily optimize your flow rates with the
new PROFORM modular 1" carb spacer
kit! Each kit comes with one frame
and 3 popular inserts: open, 4-hole,
and tapered 4-hole. Various engine
combinations have various fuel and air
distribution requirements for maximum
performance. Lightweight heat resistant
phenolic.
Part No. 67160C
MECHANICAL VACUUM
DESCRIPTION SECONDARIES SECONDARIES
600 CFM 67211 67206
650 CFM 67212 67207
750 CFM 67213 67208
850 CFM 67214 ----
STREET CARBURETORS
These Proform Street series carbure-
tors are perfectly matched for your
everyday driver. They are hand-
assembled using a lightweight
aluminum carburetor main body that
has been CNC-machined. They use
changeable screw-in air and high-
speed bleeds and include high per-
formance down-leg boosters. Attached
to the main body is Proform's billet
aluminum throttle base plate, which
features adjustable power valve blowout protection, a corrosion-resistant
anodized finish, button Torx head screws, and easy access to secondary idle
airflow adjustment. The Proform Street series carburetors use billet aluminum
metering blocks with four corner idle systems, changeable idle feed restrictors,
and non-stick gaskets for easy removal and installation.
DESCRIPTION PART NO.
Billet Metering Block 67150C
Single Inlet Carburetor Conversion Kit 67164C
Double Pumper Conversion Kit 67165C
For the
Tool Box
CARB FLOAT
ADJUSTMENT TOOL
Easily adjust your carburetor float
level with this hand float adjust-
ment tool. 5/8" socket and built-in
screwdriver blade protects your
engine and hands from fuel spray.
Part No. 67443
ALUMINUM POWER VALVE
REMOVER TOOL
Never damage your metering blocks
again! Simply place the tool over the
power valve and give it an easy turn.
Part No. 67454
ALUMINUM HIGH PERFORMANCE
CARBURETOR MAIN BODIES
These direct replacement components will save
weight and turn your tired street carburetor
into a high-performance racing carb.
DESCRIPTION PART NO.
750 CFM Replacement, Alcohol 67216
750 CFM Replacement, Annular Boosters 67217
1050 CFM Replacement, Annular Boosters 67218
Pg001_032 3/13/09 9:50 AM Page 9