Owner`s manual

Some parts are not legal for sale or use in California on any pollution controlled motor vehicle.
10
RPM AIR-GAP
TM
DUAL-QUAD MANIFOLD
AND CARB KIT
Edelbrock Manifold & Carb Kits
To get great performance out of any engine, the components must work
together. Edelbrock offers matched components to deliver the power and
performance you desire, straight out of the box. Edelbrock's new carb and
manifold kits offer matched manifolds and carbs, jetted for perfect
performance, in one easy to install package. Plus you get the benefit of
Endurashine beauty, ease of maintenance, and durability.
SINGLE-QUAD MANIFOLD AND CARB KIT
w/ENDURASHINE FINISH
A huge hit among street
rodders, the Dual-Quad Kits
offer the ultimate set-up for
anyone who wants the look of
dual-quad carbs. They include
the new Edelbrock RPM
Air-Gap Dual-Quad intake
manifold and two 500 cfm
Thunder Series AVS carbure-
tors calibrated specifically for
dual-quad applications (one
manual choke, one electric
choke). To make the
installation simple, these kits also include our high-tech progressive throttle
linkage, Russell fuel line and high-quality Edelbrock intake gaskets. Also
available with a standard finish.
Cast EnduraShine
DESCRIPTION Finish Finish
SB Chevy '55-'86 262-400 2025 20254
SB Chevy with Edelbrock E-Tec, GM Vortec or
Fast Burn heads 2026 20264
SB Chevy with LS1 (Includes ignition control module,
wiring harness, & MAP sensor) 2068 20684
W Series Chevy 348/409, Small Port 2067 20674
W Series Chevy 348/409, Large Port 2069 ----
BB Chevy 2065 20654
BB Chevy with Rectangle Port Heads 2066 20664
Chrysler 5.7L Hemi 2076 20764
SB Ford 289-302 2035 20354
SB Ford 351W 2085 20854
Ford 390-428 FE 2036 ----
DESCRIPTION PART NO.
CHEVY SINGLE-QUAD KITS
1957-86 Small-Block Chevy
Performer EPS with Performer Series 600 cfm carb 20214
Performer Air-Gap with Performer Series 600 cfm carb 20224
Performer RPM with Thunder Series AVS 800 cfm carb 20234
RPM Air-Gap with Thunder Series AVS 800 cfm carb 20244
Small-Block Chevy Vortec or Edelbrock E-Tec
Performer with Thunder Series AVS 650 cfm carb 20274
Performer RPM with Thunder Series AVS 800 cfm carb 20284
RPM Air-Gap with Thunder Series AVS 800 cfm carb 20294
Big-Block Chevy
Performer (Oval Port) with Thunder Series AVS 800 cfm carb 20614
Performer RPM (Oval Port) with Thunder Series AVS 800 cfm carb 20624
RPM Air-Gap (Oval Port) with Thunder Series AVS 800 cfm carb 20634
RPM Air-Gap (Rect. Port) with Thunder Series AVS 800 cfm carb 20644
CHRYSLER SINGLE-QUAD KIT
Chrysler 340/360
RPM Air-Gap with Thunder Series AVS 800 cfm carb 20754
FORD SINGLE-QUAD KIT
289-302 Small-Block Ford
Performer with Performer Series 600 cfm carb 20314
Performer RPM with Thunder Series AVS 800 cfm carb 20324
RPM Air-Gap with Thunder Series AVS 800 cfm carb 20334
351W Ford
RPM Air-Gap with Thunder Series AVS 800 cfm carb 20344
Ford FE
Performer RPM with Thunder Series AVS 800 cfm carb 20374
PONTIAC SINGLE-QUAD KIT
389-455 Pontiac
Performer RPM with Thunder Series AVS 800 cfm carb 20564
With the new Manifold and Carb Kits it’s easy to upgrade your induction sys-
tem with the best combination of Edelbrock proven performance in a single
box. Featuring our show-quality EnduraShine finish, these new kits include:
an Edelbrock manifold with EnduraShine finish, an Edelbrock carb with
EnduraShine finish, a chrome fuel inlet, high-quality Edelbrock intake gasket
set, Gasgacinch gasket sealer, intake bolt set and carb stud kit.
DESCRIPTION PART NO.
SB Chevy 383 '87-later, 460 HP & 460 ft/lbs w/roller cam 2096
SB Chevy '87-later 363 HP & 405 ft/lbs 2089
SB Chevy LT-4 '92-'97, 406 hp & 390 ft lbs w/roller cam 2019
SB Chevy 350 '87-later, 435 hp & 435 ft lbs w/late model hyd roller cam 2097
SB Chevy 350 '86-earlier, 410 hp & 408 ft lbs w/hyd flat tappet cam 2098
SB Chevy 350 '86-earlier, 435 hp & 435 ft lbs w/retro-fit hyd roller cam 2099
BB Chevy 396-454 '95 & earlier, 540hp & 539 ft lbs w/ hyd roller cam 2095
BB Chevy 502 Gen V/VI, 611hp & 573 ft lbs w/ late model hyd roller cam 2094
Chrysler B Block 383 '63-89, w/ hyd flat tappet cam 2086
Chrysler RB Block 440 482 hp & 528 ft lbs w/ hyd flat tappet cam 2087
SB Ford 289-302, 367 HP & 340 ft/lbs w/flat tappet cam 2091
SB Ford 351W, 400 HP & 412 ft/lbs w/flat tappet cam 2092
SB Ford 351W, 451 HP & 433 ft/lbs w/hyd. roller cam 2090
Ford Cleveland (351C heads on 302) 2059
Ford Cleveland (351C heads on 351W), 439 hp & 416 ft lb
w/ hyd roller cam 2060
POWER PACKAGE
TOP END KITS
Get all-in-one-box
performance and
convenience with
Edelbrock Top End
Kits. Includes intake,
heads, cam & lifters,
timing chain, bolt
kits and gasket set.
Pg001_032 3/13/09 9:50 AM Page 10