User's Manual

ManualsBrandsedelkrone ManualsCamera SlidersSliderPLUS v5 PRO Compact

http://edel.kr/sld5

TABLE OF CONTENTS

10.

WHAT’S IN THE BOX & THE BASICS

ATTACHING THE BELTS & TENSION ADJUSTMENT

LEGS & ANGLE ADJUSTMENT

MOUNTING SLIDERPLUS ON TRIPOD

MOUNTING YOUR CAMERA ON SLIDERPLUS

MOUNTING YOUR MAGIC ARM ON SLIDERPLUS

INCLINED MOTION

CLEANING KIT

CAUTIONS AND TIPS

Summary of content (7 pages)

PAGE 1
V5 http://edel.kr/sld5 TABLE OF CONTENTS 1. WHAT’S IN THE BOX & THE BASICS 2. ATTACHING THE BELTS & TENSION ADJUSTMENT 3. ATTACHING THE BELTS & TENSION ADJUSTMENT 4. LEGS & ANGLE ADJUSTMENT 5. MOUNTING SLIDERPLUS ON TRIPOD 6. MOUNTING YOUR CAMERA ON SLIDERPLUS 7. MOUNTING YOUR MAGIC ARM ON SLIDERPLUS 8. INCLINED MOTION 9. CLEANING KIT 10.
PAGE 2
1. WHAT’S IN THE BOX & THE BASICS 2. ATTACHING THE BELTS & TENSION ADJUSTMENT 3 1 4 5 2 6 7 1 8 9 10 11 2 12 1. 2. 3. 4. 5. 6. Rubber feet Built-in foldable legs Magnetic belt clip slot 3/8”-16 pop-up screw 1/4” mounting port Instant locking mechanism 7. 8. 9. 10. 11. 12. Incline Mounting wheel for 3/8”-16 mounting port Cleaning kit (x3) 2.5mm-3mm allen keys Motion control belt (x2) Manual control belt (x2) 1. Attach either the manuel control belt or the motion control belt depending on use.
PAGE 3
. ATTACHING THE BELTS & TENSION ADJUSTMENT 4. LEG & ANGLE ADJUSTMENT 1 2 1 To adjust the legs, 1. Loosen the wheel by turning it counterclockwise. 2. Legs are adjustable at each 15°. Adjust the leg at an appropriate angle. 3. Tighten the wheel by turning it clockwise. 2 1. Attach the other head of belt. 2. If belt tension is low, you may increase it by loosening the side wall screws and pulling out the side walls until desired tension is achieved.
PAGE 4
6. MOUNTING YOUR CAMERA TO YOUR SLIDERPLUS 5. MOUNTING YOUR SLIDERPLUS TO YOUR TRIPOD 3 1 3 2 1. 2. 3. Detach tripod head from your tripod. Place your SliderPLUS onto your tripod’s 3/8”-16 mounting screw. Mount using the mounting wheel. A detailed video explaining the process can be found at: http://edel.kr/sld5 2 1 1. SliderPLUS has 3/8”-16 screw for your tripod head hidden inside. You can access this screw with the help of a coin. Using a coin, turn the screw until it pops out.
PAGE 5
7. MOUNTING YOUR MAGIC ARM ON SLIDERPLUS 8. INCLINED MOTION 1 5 3 2 1 1/4” Mounting Hole 4 To get inclined shots, 1. Place your SliderPLUS onto 3/8”-16 mounting screw of your tripod head. 2. Attach your FlexTILT Head or any camera head onto your SliderPLUS. 3. You should attach your Slide Module to incline side of the SliderPLUS. 4. You should tighten the slide tension of the Slide Module to get inclined motion. 5. Place your camera to FlexTILT Head or any camera head. 1.
PAGE 6
10. CAUTIONS AND TIPS 9. CLEANING KIT Please contact our dedicated customer care team for recommended tripod legs. 4 1. In order to get perfect results with you SliderPLUS please attach your SliderPLUS directly to tripod legs, not to tripod head. 3 1 2 2. If your tripod has a feature that allows you to extend the height from its neck, we suggest keeping it down and as tight as possible in order to prevent a rainbow effect. 1.
PAGE 7
DISCLAIMER 3. Please make sure that your SliderPLUS withstands within the area of the tripod legs to prevent falls and balance issues. Always make sure that your system is leveled and balanced. edelkrone cannot be held responsible for damage caused by improper use or modification of the product. For more information and tips about your SliderPLUS, please watch the user’s manual videos at:http://edel.kr/sld5 4 4. Always keep your slider locked while it is not in use. 5.