User's Manual

Rubber feet
Built-in foldable legs
Magnetic belt clip slot
3/8”-16 pop-up screw
1/4” mounting port
Instant locking mechanism
1
1. Attach the other head of belt.
2.
If belt tension is low, you may increase it by
loosening the side wall screws and pulling out
the side walls until desired tension is achieved.
3. ATTACHING THE BELTS & TENSION ADJUSTMENT
A detailed video explaining how to attach the belts details can be found at:
http://edel.kr/sld5
2
4. LEG & ANGLE ADJUSTMENT
A detailed video explaining how to leg adjustment details can be found at:
http://edel.kr/sld5
1
2
3
To adjust the legs,
1. Loosen the wheel by turning it
counterclockwise.
2. Legs are adjustable at each 15°. Adjust
the leg at an appropriate angle.
3. Tighten the wheel by turning it
clockwise.