Instructions / Assembly

STEP ONE
2
Slide post caps into position as illustrated. Push firmly until arches
bottom out inside the post caps .
Join arches together as illustrated.
Fasten four 5/8 in. (1.6 cm.) screws in each post cap at top of
arches as illustrated (Fig. 1), and repeat for other arch. Fasten two
screws 5/8 in. (1.6 cm.) in top portion of post caps at bottom of
arch (Fig. 2), and repeat for other arch.
Insert arch rafters (6) into the holes on the arches until they
bottom out inside the arches. There are “locking tabs” located at
each end of the rafters that once inserted into the holes will lock
into place.
The Dublin Arbor
Assemble the Arch System
3
3
4
1
1
Fig. 2
www.edenarbors.com
2
Fig. 1
2
PLEASE NOTE:
Arch rafters have locking tabs located at both ends. Once
inserted and pushed into the routered holes they will lock
into place permanently.
4