Installation Guide

ManualsBrandsEden Arbors ManualsKitchen86.5 in. x 45 in. Vinyl London Arbor

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1 800 282 9346, ext #20

(Mon. to Fri. 8:00 AM to 4:00 PM EST).

1. Arches (2)

2. Arch Rafters (5)

3. Post Caps (4)

4. Left Posts (2)

5. Right Posts (2)

6. Side Panel Top Horizontal Rails (2)

7. Side Panel Bent Vertical Spindles (4)

56.448 in.

8. Side Panel Middle Straight Vertical Spindles (2)

55.375 in.

9. Side Panel Middle Horizontal Rail (2)

10. Side Panel Bottom Horizontal Rail (2)

11. Ground Anchoring Stakes (4)

12. 1 1/4 in (3.17cm) Self Augering Screws (34)

Tools You Will Need

• Cordless Drill

• Level

• Stool or Short Ladder

• Shovel

Assembly Time

• Approximately 30 minutes (2 People)

General Information

Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e. shipping box) to avoid scratching.

• We recommend an area approx 10 ft. x 8 ft. for unobstructed assembling.

• You should not need to use excessive force when assembling components.

The London Arbor

Please read through before starting assembly.

IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.

ASSEMBLY INSTRUCTIONS

www.edenarbors.com

Not to Scale

42 in

106.7 cm

45 in

114.3 cm

18 in

45.7 cm

21 in

53.3 cm

86 1/2 in

219.7 cm

81 1/2 in

207.1 cm

11 in

27.9 cm

56 in

142.2 cm

Ver 2/Oct 2008

Summary of content (4 pages)

PAGE 1
A S S E M B LY I N S T R U C T I O N S www.edenarbors.com The London Arbor 86 1/2 in 219.7 cm 81 1/2 in 207.1 cm 56 in 142.2 cm 11 in 27.9 cm 18 in 45.7 cm 21 in 53.3 cm 42 in 106.7 cm 45 in 114.3 cm Please read through before starting assembly. IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS. Check Box for These Contents In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST). 1. 2. 3. 4. 5. 6.
PAGE 2
STEP ONE Assemble the Arch System 1 PLEASE NOTE: Arch rafters have locking tabs located at both ends. Once inserted and pushed into the routered holes they will lock into place permanently. 1 Layout one arch and insert the five arch rafters as illustrated. 2 2 Holding the opposite arch, guide the arch rafters into the routed holes as illustrated. 3 Fasten the arches to the top rafter using 1 1/4 in (3.17cm.) screws as illustrated.
PAGE 3
6 Layout one LEFT post (as identified) horizontally with holes facing up and insert the assembled side panel by aligning the horizontal rails with the holes on the post. Large hole for ground anchoring needs to be at the bottom. www.edenarbors.com 6 7 Layout one RIGHT post (as identified) horizontally with holes facing up and insert the assembled side panel and post into. Large hole for ground anchors needs to be at the bottom. 8 Fasten the side panel to the posts by using 1 1/4 in (3.17cm.
PAGE 4
STEP FOUR Temporary Arbor Installation A Arbors must be well secured to prevent tipping over from wind load etc. We have provided four ground anchors for securing the arbor in a temporary application like a wedding, etc. These anchors are not designed to permanently mount your arbor. If you are installing your arbor on concrete or a wood deck, visit your hardware store to purchase the appropriate galvanized bracketing hardware. A Into Earth for Temporary Installation 1 2 3 in. 7.6 cm.