Instructions / Assembly

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1 800 282 9346, ext #20

(Mon. to Fri. 8:00 AM to 4:00 PM EST).

Pre-Assembled Luxembourg Privacy Screen

(1)

ost Caps (2)

3. Ground Anchoring Stakes (2)

4. Hardware (in plastic bag)

a) 5/8” Self-Auguring Stainless Steel Screws (8)

b) #2 Robertson Drill Bit (1)

Tools You Will Need

• Cordless Drill

• Hammer

• Tape Measure

• Level

• Shovel

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e. shipping box) to avoid scratching.

• We recommend an area approx 10’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

The Luxembourg Privacy Screen

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

www.edenarbors.com

(Pre-Assembled)

3.95

56.26

Not to Scale

PAGE 1
A S S E M B LY I N S T R U C T I O N S The Luxembourg Privacy Screen (Pre-Assembled) www.edenarbors.com 3.95 56.26 20 Please read through before starting assembly. 2 27 Check Box for These Contents In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST). 1. 2. 3. 4.
PAGE 2
Mounting Into the Ground 2 1 Privacy screens must be well secured in the event of high winds, etc. We have provided two ground anchoring stakes for securing the privacy screen either into the ground or into a concrete footing. If you are installing your trellis on concrete or a deck, see your hardware store for the appropriate galvanized bracket hardware. STEP ONE Install the Ground Anchor Stakes Insert the ground anchoring stakes into the bottom of the privacy screen posts.