Installation Guide

1. Pre-Assembled Side Wall Panels (2) - 10610
2. Post Caps (4) -
10611
3. Floor Panels (2) - 10612
4. Pre-Assembled Front/Back Wall Panels with Posts (2) - 10613
5. 1 1/2” (38 mm) Self-Auguring Stainless Steel Screws (16) - 20005
Tools You Will Need
• Cordless Drill
• Hammer
General Information
• Read Instructions through caref
ully before beginning assembly.
•
When
assembling components, place on a non-abrasive surface
(i.e. shipping box)
to avoid scratching.
• We recommend an area approx 4’x 8’ (1.2 m x 2.4 m) for unobstructed
assembling.
• You should not need to use excessive force when assembling components.
The Barcelona Planter Box
Please read through before starting assembly.
Check Box for T hese Contents
I
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
(UK Tel: [phone] (Mon. to Fri. 1:00 PM to 10:00 PM GMT).
ASSEMBLY INSTRUCTIONS
5
1
Not to Scale
27"
(69 cm)
20"
(51cm)
21"
(53cm)
17"
(43 cm)
1
21.75" (55 cm)
STEP ONE
Layout front wall panel on the work surface.
Insert the side walls into the routed holes on the front wall
panel posts.
Connect the Front & Back Wall
to the Side Wall Panels
1
2
1
2
1
4
3
2
V1.2/072617
www.newenglandarbors.com
www.newenglandarbors.co.uk