Installation Guide

Pressure fit into place the floor panels.
The Barcelona Planter Box
7
8
3
Install the four post caps .
Optional
To Attach the Luxembourg Privacy Screen to this Planter Box
(Purchase Separately).
Remove two post caps.
Attach trellis or privacy screen by over-sleeving the bulbed out
bottom end of the posts over the protruding posts of the planter
box until they both bottom out inside each other.
Install screws in the four pre-drilled holes at the bottom of each
post.
Discard the two post caps from planter box and ground
mounting extensions that come with trellis.
Optional
Fit the opposite back wall panel over the side walls.
Reposition the assembled planter box so it stands upright on
the work surface. Ensure at this point the planter walls are square
to each other. This can be accomplished by making sure that
the corner to opposite corner measurement both ways are equal.
3
4
5
Using the screws provided, secure the side wall panels into the front
and back wall panels with 2 screws at the ends of the rails.
Ensure that panels are fully flush inside the posts and the wall
panels are square to each other. Screws should only be drilled
in half of the length so that panels do not pull out of the
posts when under stress.
6
Invert the
planter boxand repeat this same process at the
opposite end of each of the four post.
STEP TWO
Insert Floor Panels & Post Caps
A
8
3
B
8
C
2
4
7
6
5
8
A
B
www.newenglandarbors.com
www.newenglandarbors.co.uk
North America Toll Free Phone: [phone]
United Kingdom Tel: [phone]