Specifications

RK0YG302 © Danfoss 04/2007 141
IO moduler
Type Analog
inputs
On/O outputs On/o supply voltage
(DI signal)
Analog
outputs
Module with
switches
Code No.
For sensors,
pressure trans-
mitters etc.
Relay
(SPDT)
Solid state Low voltage
(max. 80 V)
High voltage
(max. 260 V)
0-10 V d.c. For override of
relay outputs
With screw
terminals
Controller 11 4 4 - - - - -
The control module has the connections indicated in the line above. If further connections are needed, one of the following modules should be used.
Extension modules
AK-XM 101A 8 080Z0007
AK-XM 102A 8 080Z0008
AK-XM 102B 8 080Z0009
AK-XM 204A 8 080Z0006
AK-XM 204B 8 x 080Z0016
AK-XM 205A 8 8 080Z0005
AK-XM 205B 8 8 x 080Z0015
AK-XM 107A
Pulse module
080Z0020
AK-XM 208
Stepper output
module
080Z0022
AK-OB 003A
Analog output
module
2 080Z0251
Module overview
Type Function Application Code No.
AK-ST 500 Software for operation of AK controllers AK-operation 080Z0161
- Cable between PC and AK controller AK - Com port 080Z0262
- Cable between zero modem cable and AK controller AK - RS 232 080Z0261
AK-OB 101A
Real time clock with battery backup. To be mounted in an AK controller 080Z0252
AK-PS 075 Power supply 18 VA Can be mounted to the left of the control 080Z0053
AK-PS 150
Power supply 36 VA Can be mounted to the left of the control 080Z0054
AK-PS 250 Power supply 60 VA Can be mounted to the left of the control 080Z0055
AK-CM 101A
Communication module 080Z0061
Humidity sensor 080Z2171
Light sensor 080Z2172
A control in this series should be dened and selected with infor-
mation contained in the manual for the respective control.
The overview below is for information and reordering
Miscellaneous