Specifications

144 RK0YG302 © Danfoss 05/2007
max. 10 V
AK-XM 205A/B
Max. 230 V
AC-1: max. 4 A (ohmic)
AC-15: max. 3 A (Inductive)
Keep the safety distance!
Low and high voltage
must not be connected to
the same output group
Extension module
AK-XM 205A/B
Function
The module contains:
8 analog inputs for sensors, pressure transmitters, voltage signals
and contact signals.
8 relay outputs.
AK-XM 205B has eight change-over switches at the front which
make is possible to override the function of the relay.
Either to position OFF or ON.
In position Auto the controller carries out the control.
Light-emitting diodes
Status on outputs DO1 to DO8
AK-XM 205B also has a number of LEDs, which show whether the
relays are being overridden.
Light ON = override
Light OFF = no override
Fuses
Behind the upper part there is a fuse for each output.
Ordering
Type Function Code No.
AK-XM 205A
Extension module for sensors,
pressure transmitters and
on/o outputs
080Z0005
AK-XM 205B
Extension module for sensors,
pressure transmitters and
on/o output with overriding
function
080Z0015
Additional information!
See the control’s manual.