Specifications

180 RK0YG302 © Danfoss 05/2007
AK-ST 500
Application
Operational software for AK controllers
Function
The programme is an advanced software tool for operating refri-
geration controls on a network where it works as a kind of browser
for the controllers involved as it has only one user interface.
Functions and settings are presented in a number of menus
shown on the right.
Principle
The AK controller is connected to the PC tool that the programme
has installed. The PC may be portable or stationary.
All settings are then set using Windows menus.
Ordering
Type Function Application Code No.
AK-ST 500
Operational software for AK
controls
AK operation 080Z0161
-
Cable between PC and AK
controller
AK - Com port 080Z0262
-
Cable between zero modem
cable and AK controller
AK - RS 232 080Z0261
Additional information!
Manual: RS8ES
AK-ST 500
In general
All controllers in the AK series are equipped with data communi-
cation. Operation of individual controllers must take place by con-
nection to the data communication. This can take place directly
on the system or it can take place at a distance, e.g. via a modem.
A combination is also possible.
Web-based operation