Specifications
4 RK0YG302 © Danfoss 05/2007
Danfoss has s a comprehensive oer to the food retail industry
that consists of electronic controls, compressors, condensing
units, line components and services which provide optimisation
control of refrigeration system and energy savings with HACCP
compliance at the same time.
Electronic controls, as vital part of ADAP-KOOL® Refrigeration
Control System, oer a complete electronic system for control,
monitoring, and alarm handling for supermarket refrigeration
covering Compressor and condensers capacity control, Evaporator
and cold room control, HVAC and lighting control and CO
2
applications in refrigeration.
ADAP-KOOL® Refrigeration Control System and its features
make possible optimisation of refrigeration performance and
energy savings with variety of features and function according to
application requirements. That is possible due intelligent features
such as adaptive superheat control, oating condensing pressure
and suction pressure optimisation enabled by using electronic
expansion valve AKV, speed control of compressors and/or
condensers using AKD variable speed drives, intelligent defrost,
automatic fault detection and diagnosis, etc.
Advanced ADAP-KOOL® solutions are Hazard Analysis Critical
Control Point (HACCP) compliant and provide HACCP registration.
ADAP-KOOL® refrigeration control system makes the job of
complying with HACCP much easier where controllers maintain
critical temperature points, to selected limits, at measured time
intervals which can be accurately monitored, and logged against
dened parameters providing appropriate documented evidence
of HACCP compliance through simple and automatic recording
of the critical points. Data logs can be set-up to identify critical
temperatures for each area, cabinet or cold room as required and
can be easily adapted to identify and note any incidents such as
case cleaning etc. for your HACCP registration either gathered via
communication system or direct from controllers. ADAP-KOOL®
controller series combined with AKS Pt 1000 temperature sensors
maintain close and accurate set-point temperature control less
then +/- 1°C as it is required in EN441-13 without additional
calibration.
Introduction