Warranty

Prepare two G-1 guer proles by sliding four set screws into boom
bolt track. Hand tighten each end set screw to hold in place.
Prepare one G-2 guer prole with ve set screws. Slide
set screws into boom bolt track. Hand tighten
end set screw to hold in place.
2.5B
G-1
G-2
S-2A
S-2B 13
13
QTY
Prole
2G-1
G-2 1
25½”
48½”
2.5A
Working from inside, place G-1 and G-2 guer proles, ing top edge of W-1 panels into
channels of guers. Place one short G-1 guer prole at each end and the two longer
G-2 guer proles in the center. Seams
are centered to bolt tracks in F-1 proles.
2.6A
S-2A
S-2B 2
2
G-1
G-1
WWW.RSIWW.COM
12 of 44
NOTE: At front and back, edge of G-1 gutter
prole lines up ush with edge of F-7 corner prole.
Place one set screw on the inside bolt track of the guer
at each end. Hand tighten both set screws to hold in place.
NOTE: VIEW FROM INSIDE.
NOTE: VIEWS FROM INSIDE.
W-1
W-1
W-1
W-1
F-7
F-1
F-1
G-1
G-2
G-1
F-7
G-1
W-1
F-7
G-1
W-1
F-7
2.6B