Warranty

5.5
Prepare one F-4 prole. Slide two set screws into bolt track
and position as shown.
B-2
S-2C 6
2
Connector
QTY
Connector
QTY
S-2A
S-2B
10
10
Prepare one F-5 prole. Slide four set screws into bolt tracks and position as shown.
QTY
Prole
F-5
F-4 1
1
20 ½”
47 ¼”
The door frame is 65¼” high from the base. To avoid adjusting the placement
after assembly, prepare door frame using the exact measurements
listed in these steps.
5.5A
5.5B
5.5D
5.5C
Place one end of F-4 prole against F-5 prole on at level surface.
Center F-4 prole to F-5 prole and adjust set screws to t B-2
connector. Secure with three bolts.
Turn proles over and place on at surface.
Slide two set screws into bolt tracks of F-4
and F-5 proles. Repeat step 5.5C
to place and secure B-2 connector.
NOTE: The inside has two extra set
screws on the ends of F-5 prole.
F-4
F-5
F-5
IMPORTANT: F-4 prole is centered to F-5 prole and secured on both sides with B-2 connector.
F-4
F-4
F-5
F-4
F-5
F-4
F-5
B-2
B-2
22”
( 560mm)
22”
( 560mm)
F-4
F-5
B-2
24 of 44
WWW.RSIWW.COM