Warranty

A-1
Secure to Platform
The base has predrilled holes in the inside and outside bolt channels so you can easily secure
your greenhouse to a wood platform. Screw S-4 screw into hole in base
through wood until screw is ush with base prole. Continue
process around outside and inside of greenhouse
until it is evenly secured.
Use four A-1 ground anchors with four A-2 anchor brackets on the inside of the greenhouse
to secure it to the ground. Place one
on each side near the front and back
corners.
11.1
NOTE: Have the hex shaped indent facing up. Screw in until it is ush with bottom of nut so
it slides easily into bolt tracks. After inserting into bolt track, screw in until it holds in place.
NOTE: The S-4 screw is designed to be used with wood. When securing base to
foundations made of materials other than wood, use an appropriate fastener.
Make certain the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Prepare needed set screws as shown in step 1.1A
11.2
11.2A
11.2B
A-2
4
Bracket
QTY
A-1
4
Ground Anchor
QTY
S-2C
8
S-4
44
Connector
QTY
S-4
Aach each anchor bracket with two
set screws in the inside bolt channels in
base prole. Secure each with two bolts.
Screw each A-1 ground anchor through
hole in center of bracket. Use a screw driver
through the top of
A-1 anchor to screw
completely into soil.
Make certain it is
secured in ground.
WWW.RSIWW.COM
44 of 44
A-2
F-7