Instructions / Assembly

Operational Environment
Your installation location should meet the following requirements:
⚫ Ensure that the equipment is installed on a flat surface to minimise noise and vibration.
⚫ Distance between the unit's air outlet and wall or obstruction > 30 cm and distance between the
exhaust outlet and wall or obstruction > 100 cm to ensure proper space.
⚫ Do not cover the air vents, exhaust vents or sockets of the machine, as this may cause damage
to the machine.
⚫ Use of the unit via the power adapter must be installed near the grounded plug.
⚫ Access to the drainage area must be possible.
Safety in the electrical environment
When using outdoors, in rainy weather, please take special care to prevent the machine and batteries
from getting wet and to keep the air inlet and exhaust open and free from foreign objects.
Tips:
1. After a long and bumpy transport, please turn on the equipment for the first time or leave the
equipment for a long time, and leave it flat for more than 30 minutes before turning it on and running.
Use in Tent
Conventional tents / tents with air conditioning vents
Suggestion:
⚫ Pay attention to tent insulation, if the tent is poorly insulated, please cover the tent with an
insulated mat
⚫ Take care to seal and, for tents with ventilation holes, take care to close or cover them
⚫ Take care of the shade, you can cover the tent with a canopy etc.
⚫ If large tents, beyond the use of air conditioning, please add an air conditioner.
⚫ Or create a small cooling space inside the tent with a cloth partition
11