Installation guide

C HAPTER 6 | Link Aggregation
Creating Trunk Groups
– 51 –
Current Configured Trunk Groups
◆ Group ID – Displays the trunk identifier.
◆ Type – Displays the trunk type; Static or LACP.
◆ Ports – Configured port members in the trunk.
◆ LACP Active/Passive – Configured port members in an LACP trunk.
◆ Aggregated Ports – Indicates ports in a trunk that are members of an
active link.
◆ Select – Selects a configured trunk to be deleted.
WEB INTERFACE
To configure a trunk group:
1. Click Configuration, Aggregation Link, Trunk Group Setting.
2. Select the trunk group ID to be created or modified.
3. Selec the trunk type; Static or LACP.
4. Assign up to eight port members to the trunk.
5. Click Add/Modify.
Figure 12: Trunk Group Setting