User guide
Initial Configuration
4-8
4
Wired Equivalent Privacy (WEP) provides a basic level of security, preventing 
unauthorized access to the network and encrypting data transmitted between 
wireless clients and the Mini AP Router. WEP uses static shared keys 
(fixed-length hexadecimal or alphanumeric strings) that are manually 
distributed to all clients that want to use the network.
- Authentication Mode – The two basic methods of authentication supported for 
802.11 wireless networks are “open system” and “shared key.” Open-system 
authentication accepts any client attempting to connect to the access point 
without verifying its identity. The shared-key approach uses Wired Equivalent 
Privacy (WEP) to verify client identity by distributing a shared key to clients 
before attempting authentication.
- Default Key – Sets WEP key values. At least one key must be specified. Each 
WEP key has an index number. The selected default key is used for 
authentication and encryption on the VAP interface. Enter key values that match 
the key type and length settings. Standard keys are either 5 or 13 alpanumeric 
characters; or 10 or 26 hexadecimal digits.
Figure 4-7.  Encryption Settings - WEP Mode
• WPA(PSK) or WPA / WPA2(PSK) – Enable WPA(PSK) or WPA / WPA2(PSK) 
security on the VAP interface. 
Wi-Fi Protected Access (WPA) employs a combination of technologies to 
provide an enhanced security solution for wireless networks. The WPA 
Pre-shared Key (WPA-PSK) mode for small networks uses a common 
password phrase that must be manually distributed to all clients that want to 
connect to the network. WPA / WPA2(PSK) security on the VAP interface. 
WPA2 is a futher security enhancement that includes the now ratified IEEE 
802.11i wireless security standard.
- Pre-Shared Key: Enter a key as an easy-to-remember form of letters and 
numbers. The key must be from 8 to 64 characters, which can include spaces. 
All wireless clients must be configured with the same key to communicate with 
the VAP interface. 
- Confirm Pre-Shared Key: Enter the key for verification.










