User guide

System Configuration
5-10
5
Note: If you are unsure of the PC MAC address originally registered by your ISP, call
your ISP and request to register a new MAC address for your account. Register
the default MAC address of the Mini AP Router.
- Host Name: Set the Host Name if specified by the ISP.
• Static IP – Select configuration for a fixed IP address xDSL Internet connection.
- WAN IP Address: The IP address of the Mini AP Router. Valid IP addresses
consist of four decimal numbers, 0 to 255, separated by periods.
- Subnet Mask: The mask that identifies the host address bits used for routing to
specific subnets.
- Default Gateway – The IP address of the gateway router for the Mini AP Router,
which is used if the requested destination address is not on the local subnet.
- WAN DNS Server – The IP address of a Domain Name Server on the service
provider’s network. A DNS maps numerical IP addresses to domain names and
can be used to identify network hosts by familiar names instead of the IP
addresses.
• PPPoE – Enable the Mini AP Router IP address to be assigned automatically from
an Internet service provider (ISP) through an ADSL modem using PPPoE.
- Reconnect Policy: Select a procedure for the reconnect policy.
- Reconnect Timeout: The number of seconds before the next reconnect
attempt. (valid range:0-600 seconds)
- Username: If your ISP has provided you with a PPPoE user name, enter it in the
corresponding text box.
- Password: If your ISP has provided you with a PPPoE password, enter it in the
corresponding text box.
- MTU: Set the size of Maximum Transmission Unit (MTU) for the largest packet
that the network protocol can transmit.