Product Specs

5
7
振动测试 Vibration test
水平和垂直方向，每个方向两种频率各 5 个循环：a、频率 10~30~10Hz
位移距离 0.75mm b、频率 30~55~30Hz 位移距离 0.15mm，测试后检测
结构无损伤, 电气性能正常
In horizontal and vertical directions, there are 5 cycles for each frequency in
each direction: A. displacement distance of frequency 10-30-10hz is 0.75mm
B. displacement distance of frequency 30-55-30hz is 0.15mm. After the test,
the structure is free of damage and the electrical performance is normal
8
喷油丝印附着力测试
Adhesion test of oil injection screen
printing
1. 3M 胶纸（600）5 次无脱落现象
2. RCA 测试:以 225gf 力测试纸带长度 100CM 无脱落现象.
1. 3M gummed paper (600) without falling off 5 times
2. RCA test: 225 GF force is used to test the paper tape length of 100cm
without falling off
9
喷油丝印耐腐鉵测试
Surface hardness test
(except for high gloss surface)
用棉布浸泡 95%工业酒精 1min,500gf 来回 20 次擦试无脱落现象
Soak 95% industrial alcohol in cotton cloth for 1min, wipe it back and forth for
20 times with 500gf without falling off
10
表面硬度测试(高光面除外)
Surface hardness test
(except for high gloss surface)
2H 铅笔倾斜 45°,300gf 作业于产品表面均匀移动 1CM 无凹痕
2H pencil inclines 45 °, 300gf works on the product surface and moves
evenly 1cm without dent
3.5 环境测试
Environmental testing
NO
测试项目 Test item s 测试要求 Test requirements
1
高温测试 High temperature test
60℃±3℃放置 48H，常温下冷却 2H 功能正常
Place it at 60 ℃± 3 ℃ for 48h, and cool it for 2h at room temperature. The
function is normal
2
低温测试 Low temperature test
40℃±3℃放置 48H，常温下冷却 2H 功能正常
Place it at 40 ℃± 3 ℃ for 48h, cool it for 2h at room temperature, and the
function is normal
3
高低温循环测试
High and low temperature cycle test
遥控器在 40℃的环境下，放置 2H，低温-20℃放置 2H，3 个循环恢复
2H 后测试。The remote controller is placed for 2h at 40 ℃, 2h at - 20 ℃,
and 2h after 3 cycles of recovery.