Owners manual

Ford 4.6 and 5.4 Liter Evolution

If you have no trouble codes, the following screen will appear:

Clearing Codes

If you want to clear the DTCs on your vehicle, select the Clear DTCs option.

After selecting the Clear DTCs option, any current stored DTCs will be

cleared from your vehicle and the “Check Engine” light will go out.

However, if you do not address the issue that originally caused the DTC, the

DTC will set again and the “Check Engine” light will come back on. Once

the DTCs have been cleared, press [ENTER] to return to the previous menu.

Data Stream Read

The Evolution has the ability to record 5 vehicle parameters for 1 minute. It

will record each parameter every ½ second. The stored data can be retrieved

by plugging the Evolution into a USB port on a computer via the supplied

USB cable and accessing the data via the Lightning® utility software. The

Lightning® software allows you to display stored data values as well as

graph the data. See “Lightning® PC Software Overview” section for more

information.

Version Info

This displays the current Bootloader, Firmware, and Calibration versions

installed on your Evolution. Your vehicle’s HEX code is also shown. Using

the Lightning® software, you will be able to access online updates to ensure

your Evolution is always up to date.

Note: Make sure you return your vehicle to stock before attempting an update, or the PC

software will not allow you to continue.