User Manual

Ford 4.6 and 5.4 Liter Evolution

6. After pressing [ENTER], the main display will come up.

Note: Parameters and values might vary.

7. There are five boxes that will be displaying information about your

vehicle. The black box in the top right corner displays which level is

currently programmed onto your vehicle.

0 – Vehicle is currently at stock.

1 – Vehicle has been programmed to Transmission Only (Level 1).

2 – Vehicle has been programmed to Towing (Level 2).

3 – Vehicle has been programmed to Performance (Level 3).

The other four boxes can show up to 4 PIDs (Parameter IDs) of your

vehicle. By default, they are your vehicle’s RPM, MPH, TFT

(transmission fluid temperature), and ECT (engine coolant

temperature). Optional parameters and display formats may be selected

in the Changing Display section of this manual.

8. From this display, press [MENU] to select and use other features of the

Evolution. The display backlight dimming can also be controlled from

this display by using the [UP] and [DOWN] arrow keys.

9. Pressing [ENTER] while viewing these 4 PIDs will bring up a message

asking if you would like to reset the average MPG (miles per gallon).

If you press [ENTER] again, the Evolution will erase all the past MPG

stored data which was in the Evolution and restart the averaging.