User Manual

Ford 4.6 and 5.4 Liter Evolution

3. The Evolution will ask you to turn the key OFF and then ON. Do NOT

crank the engine or possible programming failure may result.

4. During the first use, the Evolution will read the original calibration

from your PCM and then build all the necessary programs. This will

take approximately 60 seconds. This step is skipped during all further

programming operations.

5. The Evolution will erase your PCM and then write the selected

calibration (level) onto the PCM. This process takes approximately 15

seconds to complete. If at any time you receive an error message, refer

to the Troubleshooting section at the back of this manual for further

instructions.

6. When the Evolution is done programming, the following screen will

appear for about 1.5 seconds and then return to the Main Menu: