User Manual

Ford 4.6 and 5.4 Liter Evolution
46
•
ERROR CODE 0xF1 (IN CUSTOM MENU) – If you are
receiving this error code while trying to configure your custom
options, disconnect from the OBDII connector, turn the key to the ON
position, and plug the Evolution back in. After getting to the main
screen (past Intro and Disclaimer), wait 15 seconds. This will give
your unit time to load parameters it needs to perform the custom
changes. You should now be able to perform your custom changes.
•
TROUBLE CONNECTING TO THE LIGHTNING
SOFTWARE
– If you are having trouble connecting to the lightning
software, the first thing to check is whether or not you have Active
Sync on your computer. Active Sync is software used to sync your
PDA/Palm to your computer. If you do have Active Sync on your
computer, follow these steps:
1. Right click on the HotSync icon that looks like this:
2. You will get a menu that looks like this:
3. By default the Local Serial will have a check by it, uncheck
Local Serial. Once you have done this, you will need to restart
your computer.
If the problem persists after restarting your computer, please call Edge
Products Technical Support.