User Manual

Ford 4.6 and 5.4 Liter Evolution
6
About the Evolution
Congratulations on purchasing the Evolution by Edge Products, LLC, the
leader in truck performance and power gain technology. The following
manual contains information and instructions on the proper use of the
Evolution. Please read carefully before proceeding to program your vehicle.
Note: Read the product disclaimer and the Getting Connected section before
programming your vehicle.
Note: It is recommended that the user not program the vehicle in
temperatures’ below 0, and anything above ???????
Stock Program
The Evolution automatically makes a backup of your stock program from
your PCM before writing a new program onto your PCM. This assures that
you will have the stock program if/when you desire to reprogram your
vehicle to its original stock program.
It is strongly
recommended prior to returning your vehicle to a service center
or emissions check that you return your vehicle’s computer to the stock
program. In the event that the service center re-flashes your vehicle’s
computer (a common practice) and you have NOT returned it to stock, your
Evolution programmer will be rendered useless. If this happens, call our
technical support at (888) 360-EDGE and they can help you recover your
Evolution for a small fee. Follow the steps included in this manual for
returning your program to stock.
Transmission Only Program
This setting is the lowest level setting. It will provide firmer transmission
shifts which helps to increase the transmission life. It does not provide any
engine performance increases and is designed to run with regular unleaded
(85 to 87 octane) fuel.