User guide

USER GUIDE
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
INTRODUCTION
9
USER GUIDE
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
There are currently a large number of CAI kits on the market. These kits are de-
signed to improve air fl ow and temperature. Some of these kits may be compat-
ible with the Evolution programmer; however others may cause a lean condition
when used in conjunction with the Evolution tuning.
MECHANICAL MODIFICATIONS
Mechanical modifi cations such as headers, upgraded camshafts, displacement
changes, cylinder head improvements etc. will change the airfl ow characteristics
of an internal combustion engine. The Evolution is not tailored to take advan-
tage of these modifi cations, for the best results we recommend vehicle specifi c
custom tuning.
FORCED INDUCTION (TURBOCHARGERS OR SUPER-
CHARGERS)
Turbochargers and Superchargers drastically change the dynamics/performance
of the engine, and its fueling/timing needs. Additional hard parts and custom
tuning are required to run a forced induction system on an engine that was origi-
nally designed as a Naturally Aspirated (NA) engine. The Evolution does not
support the addition of an aftermarket forced induction kit.
C A R B /
CARB/
E P A C O M P L I A N C E
EPA COMPLIANCE
This product meets the emissions compliance require-
ments of the California Air Resources Board and Fed-
eral Environmental Protection Agency and is legal for
sale and use on pollution-controlled vehicles operated
on public streets and highways. It must be installed and
operated according to the instructions provided in this
user’s manual. Included with this product is a sticker
like the one pictured for you to keep in your vehicle. You can either apply it
somewhere on the vehicle (e.g., the inside end of driver’s door) or simply store
it in your glove box. The purpose of these stickers is to inform anyone who
may have questions regarding the use of your Edge product and how it affects
emissions. For example, it would be something to show an emissions technician
if questioned when taking your vehicle in for an emissions check to let him/her
know the product is CARB emissions compliant.
NOTE: The stickers included in some products apply to products
that have received CARB certifi cation for emissions compliance.