User guide

Chapter 7: Safety 117
Safety
Shipping and storage (battery)
-20–60°C (-4–140°F), 15–95% R.H. (For storage longer than 30 days, store at or below room
temperature.)
500 to 1060hPa (0.5 to 1.05 ATM)
Electrical specifications
Power Supply Input: 100-240 VAC, 50/60 Hz, 2.0 A Max @ 100 VAC
Power Supply Output #1: 15 VDC, 5.0 A Max
Power Supply Output #2: 12 VDC, 2.3 A Max
Combined output not exceeding 75 watts.
Battery specifications
The battery comprises six lithium-ion cells plus electronics, a temperature sensor, and battery
contacts.
Run time is up to two hours, depending on imaging mode and display brightness.
Standards
Electrical safety standards
AAMI/ANSI ES 60601-1:2005, Medical Electrical Equipment—Part 1: General Requirements for
Basic Safety and Essential Performance.
CAN/CSA C22.2, No. 60601-1, Canadian Standards Association, Medical Electrical
Equipment—Part 1. General Requirements for Safety.
CAN/CSA C22.2, No. 60601-1:08, Medical Electrical Equipment—Part 1: General Requirements for
Basic Safety and Essential Performance.
IEC 60601-1:1988, International Electrotechnical Commission, Medical Electrical Equipment—Part
1. General Requirements for Safety.
IEC 60601-1:2005, Medical Electrical Equipment—Part 1: General Requirements for Basic Safety
and Essential Performance.
IEC 60601-1-1:2000, Medical Electrical Equipment—Part 1-1. General Requirements for
Safety-Section 1-1. Collateral Standard. Safety Requirements for Medical Electrical Systems.
IEC 60601-2-37:2001, International Electrotechnical Commission, Particular Requirements for the
Safety of Ultrasonic Medical Diagnostic and Monitoring Equipment.
IEC 60601-2-37:2007, Medical Electrical Equipment—Part 2-37: Particular Requirements for the
Basic Safety and Essential Performance of Ultrasonic Medical Diagnostic and Monitoring Equipment.
IEC 61157, International Electrotechnical Commission, Standard Means for the Reporting of the
Acoustic Output of Medical Diagnostic Ultrasonic Equipment.