User guide

20 Date and Time setup
Date and Time setup
To set the date and time
 On the Date and Time setup page, do the
following:
•In the Date box, type the current date.
•In the Time box, type the current time in
24 hour format (hours and minutes).
Display Information setup
On the Display Information setup page, you can
specify which details appear on-screen during
imaging. You can select settings in the following
sections:
Patient Header Information that appears in the
patient header.
Mode Data Imaging information.
System Status System status information.
IMT Calculations setup
On the IMT Calculations setup page, you can
customize the IMT calculations menu. You can
specify up to eight measurement names for both
right side and left side calculations. The
measurement names also appear in the patient
report.
See also “IMT calculations” on page 62.
To customize the IMT calculations menu
 On the IMT Calculations setup page, do the
following:
•Under IMT Calculations, select
measurement names from the lists, or select
None.
The selected names appear in the
calculations menu and in the patient report.
• Type the desired width in the Region width
(mm) box.
Network Status setup
The Network Status setup page displays
information on system IP address, Location,
Ethernet MAC address, and the wireless connection
if any.
OB Calculations setup
On the OB Calculations setup page, you select
authors for OB calculation tables. You can also
import or export additional OB calculation tables.
See also “OB calculations” on page 65.
To specify gestational age and growth
analysis
1 On the OB Calculations setup page, select the
desired OB authors (or select None) in the
measurement lists under Gestational Age and
Growth Analysis.
Selecting an author places the associated
measurement on the calculations menu.
2 (Optional) Select More to display the list of
user-defined custom measurements and to
associate a custom table for the custom
measurement.
This option is available only when a user-defined
custom table has been created for the custom
measurement.
To export OB calculation tables
1 Insert a USB storage device.
2 On the OB Calculations setup page, select
Export. A list of USB devices appears.
WARNING:
To obtain accurate obstetrics
calculations, an accurate date and
time are critical. Verify that the
date and time are accurate before
each use of the system. The
system does not automatically
adjust for daylight saving time
changes.