Manualshelf

ECIS4500 Quick Start Guide R01

ManualsBrandsEdgecore Networks ManualsEnterpriseIndustrial PoE+ Gigabit Ethernet Switches
3456789101112
ECIS4500 Quick Installation Guide
11
To connect the host PC to the console port, a RJ-45 (male) connector-to-RS232 DB9 (female)
connector cable is required. The RJ-45 connector of the cable is connected to the CID port of IVS-500;
the DB9 connector of the cable is connected to the PC COM port. The pin assignment of the console
cable is shown below:
Connect and Login to Managed Switch
1. Connecting to the Ethernet port (RJ-45 Ethernet port) of Managed Switch.
2. Factory default IP: 192.168.2.10 255.255.255.0
3. Login with default account and password.
4. Username: admin;
Password: admin