ECIS4500 series Web Management Guide R02

192
There are two configuration parameters for DSCP Translation -
Translate
Classify
Translation
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
Classify
Click to enable Classification at Ingress side.
Egress
There are the following configurable parameters for Egress side -
Remap DP0 Controls the remapping for frames with DP level 0.
Remap DP1 Controls the remapping for frames with DP level 1.
Remap DP0
Select the DSCP value from select menu to which you want to remap. DSCP value
ranges form 0 to 63.
Remap DP1
Select the DSCP value from select menu to which you want to remap. DSCP value
ranges form 0 to 63.
Buttons
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.