ECIS4500 series Web Management Guide R02

Command Descriptions
225
2.4.14 QCL Status
This page shows the QCL status by different QCL users. Each row describes the QCE that is
defined. It is a conflict if a specific QCE is not applied to the hardware due to hardware limitations. The
maximum number of QCEs is 256 on each switch.
Object
Description
User
Indicates the QCL user.
QCE
Indicates the QCE id.
Port
Indicates the list of ports configured with the QCE.
Frame Type
Indicates the type of frame. Possible values are:
Any: Match any frame type.
Ethernet: Match EtherType frames.
LLC: Match (LLC) frames.
SNAP: Match (SNAP) frames.
IPv4: Match IPv4 frames.
IPv6: Match IPv6 frames
Action
Indicates the classification action taken on ingress frame if parameters configured are
matched with the frame's content.
Possible actions are:
CoS: Classify Class of Service.
DPL: Classify Drop Precedence Level.
DSCP: Classify DSCP value.
Conflict
Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
Please note that conflict can be resolved by releasing the H/W resources required to
add QCL entry on pressing 'Resolve Conflict' button.
Buttons
Select the QCL status from this drop down list.