ECIS4500 series Web Management Guide R02

IP Fragment

Specify the fragment offset settings for this ACE. This involves the settings for the

More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4

frame.

No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than

zero must not be able to match this entry.

Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than

zero must be able to match this entry.

Any: Any value is allowed ("don't-care").

IP Option

Specify the options flag setting for this ACE.

No: IPv4 frames where the options flag is set must not be able to match this entry.

Yes: IPv4 frames where the options flag is set must be able to match this entry.

Any: Any value is allowed ("don't-care").

SIP Filter

Specify the source IP filter for this ACE.

Any: No source IP filter is specified. (Source IP filter is "don't-care".)

Host: Source IP filter is set to Host. Specify the source IP address in the SIP Address

field that appears.

Network: Source IP filter is set to Network. Specify the source IP address and source

IP mask in the SIP Address and SIP Mask fields that appear.

SIP Address

When "Host" or "Network" is selected for the source IP filter, you can enter a specific

SIP address in dotted decimal notation.

SIP Mask

When "Network" is selected for the source IP filter, you can enter a specific SIP mask

in dotted decimal notation.

DIP Filter

Specify the destination IP filter for this ACE.

Any: No destination IP filter is specified. (Destination IP filter is "don't-care".)

Host: Destination IP filter is set to Host. Specify the destination IP address in the DIP

Address field that appears.

Network: Destination IP filter is set to Network. Specify the destination IP address

and destination IP mask in the DIP Address and DIP Mask fields that appear.

DIP Address

When "Host" or "Network" is selected for the destination IP filter, you can enter a

specific DIP address in dotted decimal notation.

DIP Mask

When "Network" is selected for the destination IP filter, you can enter a specific DIP

mask in dotted decimal notation.

IPv6 Parameters

Next Header Filter

Specify the IPv6 next header filter for this ACE.

Any: No IPv6 next header filter is specified ("don't-care").

Specific: If you want to filter a specific IPv6 next header filter with this ACE, choose

this value. A field for entering an IPv6 next header filter appears.