CLI Reference Guide-R07

– 3 –
How to Use This Guide
This guide includes detailed information on the switch software, including how to
operate and use the management functions of the switch. To deploy this switch
effectively and ensure trouble-free operation, you should first read the relevant
sections in this guide so that you are familiar with all of its software features.
Who Should Read This
Guide?
This guide is for network administrators who are responsible for operating and
maintaining network equipment. The guide assumes a basic working knowledge of
LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network
Management Protocol (SNMP).
How This Guide is
Organized
This guide describes the switch’s command line interface (CLI). For more detailed
information on the switch’s key features or information about the web browser
management interface refer to the Web Management Guide.
The guide includes these sections:
◆ Section I “Getting Started” — Includes information on initial configuration.
◆ Section II “Command Line Interface” — Includes all management options
available through the CLI.
◆ Section III “Appendices” — Includes information on troubleshooting switch
management access.
Related
Documentation
This guide focuses on switch software configuration through the CLI.
For information on how to manage the switch through the Web management
interface, see the following guide:
Web Management Guide
For information on how to install the switch, see the following guide:
Quick Start Guide
For all safety information and regulatory statements, see the following documents:
Safety and Regulatory Information