CLI Reference Guide-R07

Chapter 11 | Interface Commands
Interface Configuration
– 360 –
Example
The following example configures Ethernet port 5 capabilities to include 100half
and 100full.
Console(config)#interface ethernet 1/5
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#
Related Commands
negotiation (363)
speed-duplex (364)
flowcontrol (361)
description This command adds a description to an interface. Use the no form to remove the
description.
Syntax
description string
no description
string - Comment or a description to help you remember what is attached
to this interface. (Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The description is displayed by the show interfaces status command and in the
running-configuration file. An example of the value which a network manager
might store in this object is the name of the manufacturer, and the product name.
Example
The following example adds a description to port 4.
Console(config)#interface ethernet 1/4
Console(config-if)#description RD-SW#3
Console(config-if)#