CLI Reference Guide-R07

– 91 –
4 System Management
Commands
The system management commands are used to control system logs, passwords,
user names, management options, and display or configure a variety of other
system information.
Cloud Management
This section describes commands used to configure the cloud management agent
on the switch for management through ecCLOUD.
Table 8: System Management Commands
Command Group Function
Cloud Management Configures the switch for management from the ecCLOUD system
Device Designation Configures information that uniquely identifies this switch
System Status Displays system configuration, active managers, and version
information
Frame Size (ECS2100-52T) Forces fans to full speed
Frame Size Enables support for jumbo frames
File Management Manages code image or switch configuration files
Line Sets communication parameters for the serial port, including baud rate
and console time-out
Event Logging Controls logging of error messages
SMTP Alerts Configures SMTP email alerts
Time (System Clock) Sets the system clock automatically via NTP/SNTP server or manually
Time Range Sets a time range for use by other functions, such as Access Control Lists
Switch Clustering Configures management of multiple devices via a single IP address
Table 9: Cloud Management Commands
Command Function Mode
mgmt Enables or disables cloud management for the switch GC
mgmt loglevel Sets the minimum level for logging messages GC
mgmt setoption Sets various options for the cloud management agent GC
mgmt property Sets cloud management settings to default values GC
mgmt upgrade Upgrades the cloud management agent code on the
switch
PE