CLI Reference Guide-R07

Chapter 4 | System Management Commands
Cloud Management
– 93 –
Command Mode
Global Configuration
Command Usage
◆ The logging levels from minimum severity to maximum severity are: Trace,
Debug, Info, Warn, Error.
◆ This command configures messages logged by the cloud management agent
based on severity. Messages from the configured level up to the maximum
level are logged. Therefore, if Info is the configured level, all messages for Info,
Warn, and Error are logged.
Example
Console(config)#mgmt loglevel info
Console(config)#
mgmt setoption This command sets options for the cloud management agent. Use the no form to
delete the specified option.
Syntax
mgmt setoption option
no mgmt setoption option
option - The option to set in the format “option name=value”.
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆ This command configures cloud management agent settings that are used in
communications between the switch and the ecCLOUD controller.
◆ The following table lists all the cloud management agent options.
Table 10: Cloud Management Agent Options
Name Type Required Default Notes
acn.settings.latitude decimal no 0 Latitude of device.
acn.settings.longitude decimal no 0 Longitude of device.
acn.settings.name string yes “IgniteNet”
(depends on brand)
Device’s name used with the controller.
acn.mgmt.enabled boolean no 0 Whether or not to enable mgmtd agent. Used by
external process which runs the actual mgmtd.